home *** CD-ROM | disk | FTP | other *** search
- %OP%IWC
- %OP%DFT
- %OP%GRY
- %CO:A,12,72%%H2%Notes on Citizen 120D Printer Driver for Pipedream 3 use
- %H4%Ned Abell 30/1/90
- Firstly where to start... do you configure the computer to issue
- linefeeds or the printer, to avoid all the text printing on one line or
- double spacing??... In %H2%%H1%MY%H2%%H1% situation the printer is configured with
- switch two set to %H2%%H1%OFF%H2%%H1% and my z88 and a310 issue linefeeds and
- carriage returns because of some accounting software I use,.. so
- therefore
- Printer set : Switch two off (no linefeeds)
- Computer set : *Configure Ignore (gives *Status "NoIgnore")
- and allows linefeeds to pass........
- Pipedream 3 set : [FILES] [Save] (ctl FS)
- "Line Separator" CR
- giving the carriage return needed...
- : [PRINT] [Printer Configuation] (ctl PC)
- "Printer Type" Parallel
- "Printer Driver" Citizen120
- The driver itself is set to start up by clearing its
- buffers and print in Pica NLQ all the time. However by selecting
- printer effect 8 (user font) with (ctl PE) it will go into normal
- draft printing until that effect is deselected. The printer should have
- its internal DIP switches set to Epson #2 emulation and the USA
- international character set (it automatically selects English to get £
- but you can print $ )- thats switch 3 on, 4 5 6 & 7 off. The setting
- of switch 2, the auto line feed switch, is set as above. You can also
- use (Ctl PA) to select the alternate elite font the machine uses. The
- RISC-OS driver supplied with the computer on the applications disc can
- also be used providing alternate fonts and graphics. %H8% (( This letter
- extract text is in non-NLQ
- (note one use of (ctl PE) to select the draft quality)))
- @D@
- Dear Citroen Car Club
- We toured France last summer in our 2CV and stayed
- at "Eurocamp" sites. At one, a couple of British tourists were unlucky
- enough to need their cars bringing home on a car transporter and the
- driver told me that he had once taken a 2CV back this way!! The reason
- - a broken clutch cable which is not available for RHD cars in France.
- The moral is clear, check your Citroen for the "British" part and take
- %H5%(( and now its draft subscript followed by draft itallic))
-
- %H4%one with you. My 2CV's now have spare clutch and accelerator cables
- %H4%under the spare wheel. Because I carry a spare this means that I won't
-
- %H7%(( and now in the alternate font pica NLQ (ctl PA)...good for
- organisers!!!...))
- ......need to change one, especially when its pitch
- black and raining!!. citroenistically ...........
- Ned
- %H8%%H5% SUBscript NLQooks like this%H7% and this as well in the other font!!
- %H6%Superscript like this in one %H7%and like this also in the other.....!!!
- %H2%Printing this document is a test to see if your setup works
- %H2%%H4%%H1% (ctl PO) best wishes and good luck ..great for a £125 printer
- Ned
- %CO:B,12,72%
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
- %CO:C,12,60%
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
- %CO:D,12,48%
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
- %CO:E,12,36%
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
- %CO:F,12,24%
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
- %CO:G,12,12%
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-